Point Sae Metric
Check out these great Point Sae Metric deals on ebay below
Point Sae Metric
 12 PC FLARE NUT LINE WRENCH SET SAE AND METRIC 6 POINT PRO GRADE US $37.95 
|
 Blue Point Socket Set SAE Metric Impact Twist Deep 13 pc set US $219.00
|
 26pc CALHAWK ALLEN BALL POINT END LONG ARM HEX KEY WRENCH SET SAE METRIC US $29.99
|
 Craftsman 3 8 drive 12 point SAE and Metric sockets 19 pcs US $15.00
|
 19 pc USA socket set SAE and Metric 6 point US $5.99
|
 26 pc Craftsman USA SAE Metric deep well sockets 6 point 12 point US $9.99
|
 20 pc STANLEY SAE Metric sockets 6 point Dewalt P2 US $5.99
|
 12 pc Chrome Vanadium SAE Metric sockets 6 point US $5.99
|
 SNAP ON TOOLS 3 8 1 4 DRIVE SHALLOW IMPACT CHROME 6 12 POINT SOCKETS SOCKET SET US $3.88
|
 SNAP ON 1 2 IMPACT SWIVEL 6 POINT SOCKETS SAE METRIC US $46.00
|
 MAC 3 8 DRIVE IMPACT SWIVEL SOCKETS 6 POINT METRIC SAE US $1.00
|
 MATCO 3 8 DRIVE UNIVERSAL SOCKETS 6 POINT METRIC SAE US $46.00
|
 K D TOOLS 50 PIECE 1 4 3 8 DRIVE SIX POINT SAE METRIC SOCKET SET MADE IN USA US $37.95
|
 Kobalt 20 Piece Standard SAE And Metric 1 4 Drive 6 Point Socket Set US $18.99
|
 BLUE POINT Craftsman Offset Ratcheting Box End Wrench Set Metric SAE 7 Pieces NR US $14.50
|
 44 Piece 1 4 Drive 6 Point SAE Metric Standard and Deep Complete Socket Set US $139.99
|
 BAHCO FACOM WILLIAMS STANLEY 3 8 SAE 48 PC SOCKET RATCHET EXTENSION SET USA US $89.99
|
 BAHCO SK FACOM WILLIAMS 3 8 SAE 33 PC SOCKET RATCHET EXTENSION SET USA US $119.99
|
 BAHCO SK KLEIN FACOM STANLEY 3 8 SAE 30 PC SOCKET RATCHET EXTENSION SET USA US $89.99
|
 49 Piece 1 2 Drive 12 Point SAE Metric Socket Set KDT80701 BRAND NEW US $283.55
|
What do the little diamonds on my tape measure mean?
OK. So, I've been using a tape measure practically all my life.
Someone recently pointed something out that I had never noticed.
There is a little diamond that appears along the tick marks at intervals of 1' - 7 3/16".
(The second one appears at #' - 2 3/8", the third at 4' - 9 9/16" and so on).
What is this increment?
It doesn't appear to correlate with SAE or Metric increments.
Is it some wierd, traditional military measurement.
Help Please.
Sometimes framing members, especially floor joist are specified to be spaced at 19.2" on center. 19.2" is roughly 19 3/16" or 1' 7 3/16", so the diamonds make it easy to identify this spacing along the full length of the measure.
This has mostly come about with engineered floor joists. It is often overkill to space these at the traditional 16" on center, but 24" on center is a bit much. 19.2" is the increment in between that works well with 4' x 8' plywood laid perpendicular to the joists. 8', or 96" divided by 5 = 19.2", so the joints fall on a joist and there is no waste.
Amazing
Related Point Sae Metric Searches