Media Abrasive Sand
Check out these great Media Abrasive Sand deals on ebay below
Media Abrasive Sand
 Deluxe Abrasive Blaster Media Sand Blasting Blast Hood US $34.94 
|
 BB1550XLD BVD MEDIA CABINET ABRASIVE SAND BLASTER BLAST US $2,199.00
|
 BB550BVD MEDIA ABRASIVE SAND BLAST BLASTING CABINET US $1,549.00
|
 GLASS ABRASIVE 100 Fine 24 lbs Sand Blast Cabinet BLASTING MEDIA US $13.95
|
 NEW CLEMCO ABRASIVE MEDIA 7 16 TUNGSTEN CARBIDE SAND BLAST NOZZLE SANDBLASTER US $55.00
|
 BB750XLD MEDIA ABRASIVE SAND BLAST BLASTING CABINET US $959.00
|
 BB100D MEDIA ABRASIVE SAND BLAST BLASTING CABINET US $189.00
|
 ALUMINUM OXIDE 100 Fine Abrasive 25 lbs Sand Blast Cabinet BLASTING MEDIA US $32.95
|
 BB 250D MEDIA ABRASIVE SAND BLAST BLASTING CABINET US $269.00
|
 PRESSURE MEDIA SAND CABINET ABRASIVE SODA BLASTER POT US $299.00
|
 GARNET 120 WJ Fine 25 lbs Sand Blast Cabinet ABRASIVE BLASTING MEDIA US $18.95
|
 BB 9000XLD BVD PR PRESSURE MEDIA ABRASIVE SAND BLAST BLASTER CABINET US $6,999.00
|
 BLASTING HOOD MEDIA ABRASIVE SAND BLAST BLASTER CABINET US $39.95
|
 GLASS ABRASIVE 40 Very Coarse 25 lbs Sand Blast Cabinet BLASTING MEDIA US $13.95
|
 GLASS ABRASIVE 75 Medium Fine 25 lbs Sand Blast Cabinet BLASTING MEDIA US $13.95
|
 Speed Bead Abrasive Sand Blast Blaster Media 6703 50 US $59.00
|
 ABRASIVE SAND MEDIA BEAD BLAST BLASTER BLASTING CABINET US $134.49
|
 BB 5000XLD BVD WARRIOR ABRASIVE SAND BLAST BLASTING MEDIA BLASTER CABINET US $4,799.00
|
 BB1500XLD MEDIA CABINET ABRASIVE SAND BLASTER BLAST US $1,799.00
|
 BB2000BVD MEDIA ABRASIVE SAND BLAST BLASTING CABINET US $2,799.00
|
What abrasive blasting media to use with polyurethane removal?
I have 400sqft car siding on my vaulted ceiling in my 4 seasons porch. My dad messed up on applying the polyurethane to the ceiling. He put it on with a roller and because of that there are tons of run marks are drips which dried so we have a dripping effect on the ceiling. Anywho, I'm going to refinish it but first I must get rid of the old polyurethane. I've used chemical stripper and doesn't seem to be doing the job without having like a belt sander. I decided that I'm going to apply the chemical stripper and instead of using sand paper to take it off I'm going to blast media to take it off. Which is the best stuff to use and where can I get it? Corn Cob? the lowest point of the ceiling is approx. 9 ft off the floor and then inclines up to around 17ft off the floor.
OMG,,, blasting inside,,,, what a mess,,,, and the noise.
OK,, ,if you are going to do this, the media used depends on the material the polyurethane is on. I think you have metal,,, but I'm not sure.
Corn cob works,,, but it's slow. It will not damage plastic as much as other types of media,,,but will take a long time.
Nut husks,,,, is probably what you want. Walnut shell is my fav.
Of course, there are several types of plastic bead media,,, and if you can control the overspray,,, and can clean up easy,,,, and have good respiratory protection,,,, the tried and true sand is the best for cutting that polyurethane,,, toot sweet.
Related Media Abrasive Sand Searches