Media Sand Blast
Check out these great Media Sand Blast deals on ebay below
Media Sand Blast
 Deluxe Abrasive Blaster Media Sand Blasting Blast Hood US $34.94 
|
 GLASS BEAD 11 Very Fine 25 lbs Sand Blast Cabinet BLASTING MEDIA US $22.95
|
 BB1550XLD BVD MEDIA CABINET ABRASIVE SAND BLASTER BLAST US $2,199.00
|
 GLASS BEAD 7 Medium Fine 25 lbs Sand Blast Cabinet BLASTING MEDIA US $21.95
|
 BB550BVD MEDIA ABRASIVE SAND BLAST BLASTING CABINET US $1,549.00
|
 NEW CLEMCO ABRASIVE MEDIA 7 16 TUNGSTEN CARBIDE SAND BLAST NOZZLE SANDBLASTER US $55.00
|
 GLASS ABRASIVE 100 Fine 24 lbs Sand Blast Cabinet BLASTING MEDIA US $13.95
|
 BB750XLD MEDIA ABRASIVE SAND BLAST BLASTING CABINET US $959.00
|
 BB100D MEDIA ABRASIVE SAND BLAST BLASTING CABINET US $189.00
|
 ALUMINUM OXIDE 80 Med Fine Grit 25 lbs Sand Blast Cabinet BLASTING MEDIA US $31.95
|
 BB 250D MEDIA ABRASIVE SAND BLAST BLASTING CABINET US $269.00
|
 ALUMINUM OXIDE 100 Fine Abrasive 25 lbs Sand Blast Cabinet BLASTING MEDIA US $32.95
|
 BB 9000XLD BVD PR PRESSURE MEDIA ABRASIVE SAND BLAST BLASTER CABINET US $6,999.00
|
 25 lb Medium Black Beauty Blast Media Sandblast Cabinet Durable Reusable US $25.99
|
 BLASTING HOOD MEDIA ABRASIVE SAND BLAST BLASTER CABINET US $39.95
|
 GARNET 120 WJ Fine 25 lbs Sand Blast Cabinet ABRASIVE BLASTING MEDIA US $18.95
|
 GARNET 50 SJ Med Coarse Grit 5 Cups Sand Blast Cabinet BLASTING MEDIA US $6.50
|
 Walnut Shell Sand Blaster Sandblasting Media 6701 50 US $49.00
|
 GLASS ABRASIVE 40 Very Coarse 25 lbs Sand Blast Cabinet BLASTING MEDIA US $13.95
|
 Speed Bead Abrasive Sand Blast Blaster Media 6703 50 US $59.00
|
why is the sandblaster surging and clogging?
Blasting away with a vacuum-draw sandblaster (sandblast cabinet), the sand comes out in surges. One instant you'll get plenty of sand, the next instant none. It's really hard to work with a piece, because you have to hold it aimed at a spot, wait for a surge, see if it did the job and go to the next. Very tedious.
Also it seems the suction pipe gets quite full of sand. It seems "clogged up" . I can blow it back out, and then the sandblaster works right for literally 2 seconds.
Checked for moisture problems, and my air is dry as can be. This is a suction gun, so the air never goes down the suction hose. The end of the hose is buried quite deep in the media, which is aluminum oxide.
I've used other sandblasters where it just blasted right along with smooth flow of media. Any ideas?
1. Is the AluOx perfectly dry? And I mean, all through....
2. Is the AluOx a suitable grain size for the blaster? It might be too coarse... jamming in the pickup, especially at the entrance.
3. If it's a rubber hose pickup, it could have internal damage.
4. Have you tried a shallower pickup point?
Related Media Sand Blast Searches