Car restoration is one activity that will leave you with an extreme sense of accomplishment. It is a hobby that demands dedication, time and money. Fords and Chevy’s are the two models that are the easiest to start with as there are always parts available as the need arises.

Before any car restoration you will need to prepare your shop for the the job. Gather the materials needed such as a camera, a few cardboard boxes, a sharpie and some tags for labels. It is important to keep track of the parts that are taken off now rather than later. When it is time to take the car apart you need to estimate what needs to be replaced and what needs to be repaired. With this type of organization you will ensure you are not wasting parts during the car restoration project.

Take inventory of the parts as you pull them off by separating them into two individual cartons labeled replace and repair. Remember to take pictures of them as you do this getting a picture of what the car will look like, before and after. This process will also help you in figuring how much money you will need and how long it will take you to complete the car restoration.

After you have all the parts removed you can start the cleaning process. The cleaning process of the car restoration requires the car be stripped down to bare metal. This can be done through several methods although you will need to find one that you feel the most comfortable with. The easiest way by far is to have the car dipped in acid. This removes dust, rust, and other foreign materials.

You will be able to view the damage the car has been through once it is stripped. You could find rust holes, damaged floorboards, and dents. Do not despair! Even if the car didn’t look very bad when you bought it you must realize that this car has had a full eventful life. You want to extend it's life right? So get busy and take that Sharpie to mark all the things that either need replacing or repairing.

Now it's time to patch up all those dents, holes, and problem areas in order to get set for sanding. You will use several grades of sandpaper throughout the sanding procedure beginning with 36 to 80. Once you have finished this step you are now ready to apply the glazing. Begin with 220 wet grit sandpaper and proceed to 800 wet grit sandpaper. This will leave your car with a hazy mirror image and also provide a preventative measure against scratches.

Your car restoration is finished! You are now ready to show off your beautiful car to the neighborhood with well earned pride.

For All The Essential Information On Classic Car Restoration, go to: car restoration tips

Tagged with:

Filed under: Cars