Check Your Vehicle’s Tire Pressures With A Tire Pressure Gauge
Tire pressure gauges are an important tool used in the diagnostics of a motor vehicle. These essential tools indicate to the user how much air pressure is sitting in the tire. The air pressure of your tire is extremely important because any missing air or overage of air, in any of the tires, can cause your car to go out of control.
Inefficient air pressure, or too much in a vehicle's tire, can result in the loss of control for the driver. When air is low, the car will jerk to the side having more pressure. And, overfilling a tire can result in a drag of the car's steering to the side where the tires are less inflated. With this issue, it is essential to make sure the tire is filled to its manufacturer's specification PSI (pressure per square inch), but the same for each four tires. So, if you are filling your tires 5 PSI, then all get filled to 5 PSI.
Not only is it dangerous to have too little pressure or too much pressure, it is just as harmful when you are checking the tire's air pressure. When gauging the air inside a tire, follow the steps below:
1. Check the manufacturer's listed PSI you must pump the tires to. This can be found on the outer wall of the tire. Some believe it is ok to inflate the tires a maximum of5 PSI under the manufacturer's specification. However, it is not suggested to pump them any more than the recommendation. The typical automobile's tires these days take approximately 35 PSI. However, it is better safe then sorry so its best to check.
2. Aim your face away from the tire prior to checking the level of air. Hold the tire pressure gauge to the lip of the tire. Move it until you do not hear any air escaping. Look at the gauge and check the reading.
3. If the gauge shows 0 PSI, then it should you are almost completely out of air. If you need air, fill up to the maximum PSI.
4. Measure the pressure again with the gauge. It should display something over 0 PSI once you get passed about 10 PSI.
5. Following this, fill until you achieve the maximum PSI suggested. Again, it is dangerous to inflate above the maximum specified PSI as designated by the tire manufacturer.
Not following the above list when measuring the pressure with a gauge can be very harmful. If a tire is overinflated, it can pop, sending shrapnel in all directions. Most tires today are fabricated with steel belts to bend the rubber together. This metal can become a sharp trajectory that can lead to serious injury. There have actually been deaths from over inflating car tires.You can seriously reduce the risk injury by protecting yourself and those around you.
Tagged with: car • Car Articles • car safety • safety • tire • Tire Pressure Gauge • vehicle safety • web
Filed under: Car Articles